Can I use an additional port other than port 25 for SMTP connections? I was told I should open up more ports for SMTP because most ISPs block port 25 now.
For configuring Mail Submission in Plesk 11.x and later for Windows please refer to the article
(Plesk 9.5.x - 11.x)
By default, Plesk 11.x accepts mail submission on TCP port 587.
Open Tools & Settings > Mail Server Settings (in the Mail group). Select the Enable message submission checkbox
We recommend that you use the Plesk web interface to configure the Postfix Submission port. If you configure the SMTP submission port directly in MTA, the setting can be overwritten by Plesk.
Follow the instructions below to configure an additional SMTP port for your MTA:
QMail (Plesk 8.x, 9.x)
Choose any unused port and add it to the /etc/services file. For example:
smtp_alt 25025/tcp # new SMTP port
If you have 'xinetd' as a super-server, make a copy of /etc/xinetd.d/smtp_psa to /etc/xinetd.d/smtp_psa_alt and correct the service line within the new file:
/etc/init.d/xinetd restart and the SMTP connections will be accepted on both the standard and 25025 ports. You may also need to reconfigure Horde IMP (webmail) settings so they use the alternative SMTP port. This can be done in the /etc/psa-horde/imp/servers.php file under the smtpport parameter for both IMAP and POP3 servers.
If you have a 'netd' super-server (Debian or FreeBSD), modify inetd.conf to enable an additional SMTP port:
grep '^smtp ' /etc/inetd.conf | sed 's/^smtp/smtp_alt/' >> /etc/inetd.conf
and restart inetd.
NOTE : If you want to disable the default (25) port completely and only use an alternate one, please do not block port 25 at the firewall and do not remove the
smtp_psa service from the
xinetd/inetd . Instead, set the default SMTP service to be listened only on 127.0.0.1 by adding
bind = 127.0.0.1 to
/etc/xinetd.d/smtp_psa . Otherwise, the SMTP service status will be displayed incorrectly in the Plesk control panel. Plesk determines SMTP service status by checking the 25th port and the port number is hardcoded there.
Postfix (Plesk 9.x, 10.x, ...)
Add the following line to the Postfix configuration file /etc/postfix/master.cf:
<IP_Address>:<port> inet n - n - - smtpd
<IP_Address> is the IP address of your server and
<port> is the additional port for the SMTP connection.
If Postfix is configured to use Postfix Before-Queue Content Filter extend the line with the proxy filter settings:
<IP_Address>:<port> inet n - - - - smtpd -o smtpd_proxy_filter=127.0.0.1:10025
Reload the mail service with mailmng after the reconfiguration:
# /usr/local/psa/admin/sbin/mailmng --reload-service
Reloading postfix: [ OK ]